What if there are leakage points in the use of FRP tank?

Today, Xiaobian leads you to understand the remedy for the leak in the glass fiber reinforced plastic tank: If the leak occurs in the use of the glass fiber reinforced plastic tank, timely measures need to be taken to repair, in order to avoid the expansion of the leak point leading to more serious consequences. The specific methods are as follows:

1. Stop using: First of all, stop using the storage tank and empty the medium in it for repair.

2. Clean the surface: clean the surface around the leak point to remove dirt and impurities, so as to facilitate subsequent repair operations.

3. Find the leak point: Find the location of the leak point, which can be located by applying color agent or touching the hand.

4. Repair: According to the size and position of the leak point, select the appropriate repair material for repair, commonly used repair materials include FRP glue, epoxy resin, etc.

5. Wait for curing: After the repair is completed, it is necessary to wait for the repair material to cure, which usually takes a few hours or even more than a day.

6. Quality inspection: After the repair is completed, quality inspection is required to ensure that the repair effect meets the requirements.

In short, when repairing the leak point of the FRP tank, it is necessary to pay attention to safety and quality, and choose the appropriate repair materials and methods to ensure the repair effect and the safety of the storage tank.