What is the equipment composition of intelligent integrated prefabricated pumping station?

The equipment composition of intelligent integrated prefabricated pumping station has the following seven types:

First, intake gate. It can play a short time to block the effect of sewage inlet, and provide time for the maintenance of equipment such as grid decontamination machine and sewage pump.

2. Water inlet channels. The inlet channel is the channel through which the sewage in the underground pipeline enters the collecting well. The inlet channel is divided into two areas inside and outside by the stainless steel grating. The ultrasonic level difference meter needs to be installed respectively to measure the level difference before and after the grating.

3. Collecting well. In the integrated prefabricated pump well, 4 submersible sewage pumps are placed side by side, 3 are started at the same time, and 1 of them is reserved for backup. Ultrasonic liquid level meter is also installed on the inner wall of the collecting well to realize real-time monitoring of the sewage level of the collecting well.

Four, decontamination machine. In the intelligent integrated precast pump station, the most indispensable is the wire rope traction type grid decontamination machine, in order to deal with the dirt attached to the grid or the waste in the inlet channel. Prevent it from flowing into the catchment Wells.

5. Machine room. Built on the upper part of the integrated prefabricated pump collection well, the main function is to repair and control the operation of the sewage pump.

6. Control room. In the control room, there are two low-voltage incoming cabinets and one contact cabinet, three other power switch cabinets and sewage pumps, one power factor compensation cabinet and PLC control cabinet.

Seven, transformer room. There are two 315 kVA power transformers in the pumping station to ensure the reliability of the intelligent integrated prefabricated pumping station.